Bulk Micro Nano Manufacturing Laboratory

purdue

Publication

 

Refereed journal papers.

 

 

1. Fu Zhao, William Z. Bernstein, Gautam Naik, Gary J. Cheng, 2010, “Environmental Sustainability of Laser-Assisted Manufacturing: Case Studies on Laser Shock Peening and Laser Assisted Turning”, Journal of Cleaner Production, in press. 

2. C Ye, GJ Cheng, 2010, “Warm Laser Shock Peening Driven Nanostructures and Their Effects on Fatigue Performance in Aluminum Alloy 6160”, Advanced Engineering Materials, 12 (4), 291 - 297.  Selected Covering Page.

3. H Gao, GJ Cheng, 2010, "Laser Induced High-strain-rate Superplastic 3D Micro-forming of Metallic Thin Film", IEEE/ASME Journal of Microelectromechanical Systems, doi:10.1109/JMEMS.2010.2040947.

4. DC Rieck, B Liu, D.F Moffett,  KA David, GJ Cheng, BJ Van Wie, 2010, "Functionalization of Micro- and Nano-Apertures with Chromate-Selective Solvent Polymeric Membrane", Analytica Chimica Acta, 659(1-2), 243-250.

5. J Li, GJ Cheng, 2009, “Multiphysics Simulation on electromagnetic peening of pre-drilled holes”, International Journal of Mechanical Sciences, in press, doi:10.1016/j.ijmecsci.2009.09.016.  

6. H. Gao, C. Ye, GJ Cheng, 2009, “Deformation behaviors and critical parameters of microscale laser dynamic forming”, ASME Transaction Journal of Manufacturing Science and Engineering, 131, 051011.

7. C. Yu, H. Gao, H. Yu, H. Jiang, G.J. Cheng, 2009, “Laser Dynamic Forming of Functional Materials Laminated Composites on Patterned Three-Dimensional Surfaces with Applications on Flexible Microelectromechanical Systems”, Applied Physics Letter, 95(9), id. 091108.

8. D Pirzada, G.J. Cheng, 2009, “Microstructure and Texture Developments in Multiple Pulses Excimer Laser Crystallization of GaAs Thin Films”, Journal of Applied Physics, Issue 9, pp. 093114.   

9. X Zhu, M Zhou, Q Dai, G.J. Cheng, 2008, “Deformation Modes in Stainless Steel during Laser Shock Peening”,  ASME Transaction Journal of Manufacturing Science and Engineering, Volume 131(5), 054503.

10. GJ Cheng, C Ye, 2009, “Experiment, Simulation and Characterization on Transmission Laser Coating of Hydroxyapatite on Metal Implant”, Journal of Biomedical Materials Research: Part A,  Published Online: Jan 22 2009, DOI: 10.1002/jbm.a.32325.

11. B Liu, V Bernard J., GJ Cheng, DF Moffett, DA Kidwell, 2008, “Bilayer lipid membrane (BLM) based ion selective electrodes at the meso, micro, and nano scales”, Biosensors and Bioelectronics, 24, pp. 1843-49.

12. G.J. Cheng, M. Cai, D. Pirzada, M. F. Guinel, G. M. Norton, 2008, “Plastic Deformation in Silicon Crystal induced by Heat Assisted Laser Shock Peening”, ASME Transaction Journal of Manufacturing Science and Engineering, pp. 11008.

13. D. Pirzada, G.J. Cheng, D. Field, 2007, “Effect of film thickness and laser energy density on the structural characteristics of laser-annealed polycrystalline gallium arsenide films”, Journal of Applied Physics, 102, pp. 013519.

14. M. Cai, G.J. Cheng, 2007, “Microstructure-properties relationship in Al-Mg-Si Alloys subject to a combined process of extrusion and ageing”, JOM Journal of the Minerals, Metals and Materials Society, 59(8), pp. 58-61.

15. G.J. Cheng, D. Pirzada, 2007, “Structural Characterizations on microscale laser dynamic forming of metal foil”, Journal of Applied Physics, Vol.101 (6), pp. 063108.

16. E. Ozlu, J. Zhe, S. Chandra, J. Cheng, X. Wu, 2006, “Feasibility study of a smart motion generator utilizing electromagnetic microactuator arrays”, Smart Materials and Structures, v15, pp. 859-868.

17. G.J. Cheng, M. Shehadeh, 2005, “Dislocation Behavior in Silicon Crystal by Laser Shock Peening: A Multiscale Simulation Approach”, Script Materialia, Vol. 53 (9), pp.1013-1018.

18. J. Cheng, D. Pirzada, and P. Dutta, 2005, “Design and Fabrication of Hybrid Nanofluidic Channel,” Journal of Microlithography, Microfabrication and Microsystems, Vol. 4(1), pp.013009.

19. J. Cheng, D. Pirzada, P. S. Mohanty and A. Bandyopadhyay, 2005, “Bioceramic Coating of Hydroxyapatite on Metallic substrate with Nd-YAG laser”, Materials Science and Engineering, C, Vol. 25 (4), pp. 541-547.

20. J. Cheng, M. Shehadeh, 2005, “Multiscale Dislocation Dynamics Analyses of Laser Shock Peening in Silicon Single Crystals”, International Journal of Plasticity, Volume 22, Issue 12, pp. 2171-2194.

21. J. Cheng, J. Zhang and J. Zhe, 2005, “Experimental Study and Computer Simulation on Fracture Toughness of Sheet Metal after Laser Forming”, International Journal of Advanced Manufacturing Technology, Vol. 26, pp. 1222-1230.

22. J. Zhang, D. Pirzada, C.C. Chu and J. Cheng, 2005, “Fatigue Life Prediction of Sheet Metal after Laser Forming”, Journal of Manufacturing Science and Engineering, Vol. 127, pp. 1-8.

23. Y. L. Yao, J. Cheng, K. P. Rajurkar, R. Kovacevic, S. Feiner, and W. Zhang, 2005, “Combined research and curriculum development of nontraditional manufacturing”, European Journal of Engineering Education, Vol. 30-3, pp. 363-376.

24. Y. L. Yao, J. Cheng, K. P. Rajurkar, R. Kovacevic, S. Feiner, and W. Zhang, 2005, “A Web-based Curriculum Development on nontraditional manufacturing with Interactive Features”, International Journal of Engineering Education, Vol. 21(3), pp. 546-553.

25. J. Cheng and Y.L.Yao, 2004, “Process Design of Laser Forming for Three Dimensional Thin Plates”, J. Manufacturing Science and Engineering, Vol. 126, pp.217-225.

26. J. Cheng, J. Zhe, X. Wu, 2004, "Analytical and FEM Pull-in Study on Rigid and Deformable Electrostatic Micro Actuators," Journal of Micromechanics and Microengineering, Vol. 14 No 1, pp. 57-68.

27. J. Cheng and Y.L.Yao, 2004, “Process synthesis of Laser forming by Genetic Algorithm”, Int. J. Machine Tools & Manufacture, Volume 44, Issue 15 , December 2004, pp. 1619-1628.

28. J. Cheng and Y.L.Yao, 2002, “Microstructure Integrated Modeling of Multiscan Laser Forming”, Journal of Manufacturing Science and Engineering, Vol. 124, No. 2, pp. 379-388.

29. J. Cheng and Y.L.Yao, 2001, “Cooling Effects in Multiscan Laser Forming”, Journal of Manufacturing Process, Vol.3, No.1, pp. 60-72. 

30. A. W. Zhu, J. Cheng and E. A. Starke Jr., 2000, “Precipitation Strengthening of Stress-aged Al-xCu Alloys”, Acta Materialia, Vol. 48, 2239-2246.

31. J. Cheng and Y.L.Yao, 2001, “Cooling Effects in Laser Forming”, Transaction of NAMRI/SME Volume XXIX, 2001, 119-126.

 

 

 

Conference papers:

1. H. Gao, GJ Cheng, “Deformation behaviors and critical parameters of microscale laser dynamic forming”, Proceedings of 6th International Workshop on Microfactories (IWMF’2008).

2. C Ye, GJ Cheng, “Characteristics of Pulsed laser sintering of Bioceramic Nanoparticles”, 2008 ASME International conference on Manufacturing Science and Engineering, MSEC_ICMP 2008-72426.

3. GJ Cheng, C Ye, “Experiment, Simulation and Characterization on Transmission Laser Coating of Hydroxyapatite on Metal Implant”, 2008 ASME International Conference on Manufacturing Science and Engineering, MSEC_ICMP2008-72290. 

4. D. Pirzada, GJ Cheng, “Effect of film thickness and laser energy density on the structural characteristics of laser-annealed polycrystalline gallium arsenide films”, Proceedings of IMECE’ 06, 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006-16247.

5. D. Pirzada, GJ Cheng, “Numerical Simulation on Short Pulsed Laser Heating of Semiconductor Thin Films: The Case of GaAs”, Proceedings of IMECE’ 06, 2006 ASME International Mechanical Engineering Congress and Exposition, Session: HT-2 C Electron, phonon, and photon interactions, IMECE2006-16218.

6. B. Liu, V. Bernard J., GJ Cheng, D. F. Moffett, D. A. Kidwell, Fabrication of nano apertures and their application in biomimetic sensing.    232nd ACS National Meeting, San Francisco, CA, United States, Sept. 10-14, 2006.

7. S. J. Haarsma, V. Bernard J., GJ Cheng, D. F. Moffett, D. A. Kidwell,   Biosensors using molecular immunoaffinity constructs for detection of noncharged organic species and proteins. 232nd ACS National Meeting, San Francisco, CA, United States, Sept. 10-14, 2006.

8. Liu, Bingwen, Van Wie, BJ, Cheng, J, Moffett, DF, Kidwell, DA, Microfabrication and Characteristics of Bilayer Lipid Membrane (BLM) Based Potassium BioSensors, Proceedings of 2006 Micro Nano Breakthrough Conference, Portland, Oregon.

9. Y. Wang and J. Zhe,  P. Dutta, and J. Cheng, “A hybrid rapid microfluidic mixer utilizing electrokinetic relay and asymmetric flow geometries for lab-on-a-chip applications”,  Proceedings of IMECE’ 05, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida, Paper No. IMECE2005-80423.

10. J. Zhe, Y. Wang, P. Dutta, J. Cheng, “Numerical Study of a Hybrid Rapid Micro-Mixer”, Proceedings of IMECE’ 06, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2006, Chicago, IL, Paper No. IMECE2006-80423.

11. J. Cheng, D. Pirzada, “Mechanical Property Enhancement of Silicon Component with Laser Shock Peening”, TMS 2005, 137th Annual Meeting and exhibition, Feb. 13-17, 2005, San Francisco, CA.

12. J. Cheng, P. Dutta, “Design and Fabrication of a Hybrid Nanofluidic Channel Networks”, The 3rd International conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Canada.

13. J.Cheng, K.Choi, M. Shehadeh, H.Zbib, “Dislocation activity in silicon crystal by Laser shock Peening”, Gordon Research Conference, Aug. 1-6, 2004, Andover, NH.

14. J. Cheng, D. Pirzada, and P. Dutta, “Design and Fabrication of a Hybrid Nanofluidic Channel”, Micro Nano Breakthrough Conference, July 28-29, 2004, Portland, OR.

15. J. Cheng, Daniel Pirzada and A. Bandyopadhyay, “Bioceramic Coating of Hydroxyapatite on Ti6Al4V substrate with Nd-YAG laser”, ASM’s 3rd International Surface Engineering Congress & Exhibition, Session 2, Bio-Tribology, Aug. 2-4, 2004, Orlando, FL, USA.

16. E. Ozlu, J. Zhe, J. Cheng, Feasibility Study on A Novel Electromagnetic MEMS Actuator With Planar Coils, 9th International Conference on New Actuators, Bremen, Germany, 14-16, June, 2004. Session Micro Actuator (B1.4).

17. J. Cheng and Y.L.Yao, “Process Design of Laser Forming for Three Dimensional Thin Plates”, WLT International Conference on Lasers in Manufacturing 2003, 23–26 June, Munich, Germany.

18. Y. L. Yao, K. P. Rajurkar, R. Kovacevic, W. Zhang, and J. Cheng, “Combined research and curriculum development: nontraditional manufacturing (NTM)”, Proceedings of the NSF Workshop on Research Needs in Thermal Aspects of Material Removal Processes, June 10-12 2003, Oklahoma State University, pp. 366-374.

19. J. Zhang and J. Cheng, “Fatigue Life Prediction after Laser Forming”, Proceeding of ICALEO, 2003, Oct. Jacksonville, FL. paper # 105.

20. J. Zhang and J. Cheng, “Experimental Study and Computer Simulation on Fracture Toughness of Sheet Metal after Laser Forming”, Proceeding of ICALEO, 2003, Oct. Jacksonville, FL. paper # 108.

21. J. Cheng, J. Zhe, X. Wu “Analytical Pull-in Study on Non-deformable Electrostatic Micro Actuators”, Technical Proceedings of the 2002 International Conference on Modeling and Simulation of Microsystems, Nanotech 2002 Vol. 1, pp. 298-301.

22. J. Zhe, X. Wu, and J. Cheng “Analytical and FEM Simulation Pull-in Study on Deformable Electrostatic Micro Actuators”, Technical Proceedings of the 2002 International Conference on Modeling and Simulation of Microsystems, Nanotech 2002 Vol. 1, pp. 287-290.

23. J. Cheng and Y.L.Yao, “Microstructure integrated modeling of Multiscan laser forming”, Proc. of 2001 ASME International Mechanical Engineering Congress and Exposition November 11-16, 2001, New York, NY. IMECE2001/MED-23346.

24. J. Cheng and Y.L.Yao, “Process synthesis of Laser forming by Genetic Algorithm”, Proceeding of ICALEO, 2001, Section D. 604.

25. J. Cheng, et al., “Large Deformation Elastic-plastic Finite Element Simulations of Cylindrically Bending of Metal Strips”, Proceeding of the International Conference on Modeling and Simulation in Metallurgy Engineering, June, 1996.

26. J. Cheng, et al., “Experimental Study on the evolution of Precipitation of Interstitial Free (IF) Ti-Steel in Hot-rolling”, Proceeding of The Anniversary of Canada Metallurgy Society, Aug, 1996.

 

Books or other One-time Publications

1. H. F. Doty, B. J. Van Wie, G. Hooks, J. E. Ebaugh, S. J. Haarsma, H. Fuchida, GJ Cheng, B. Liu, D. A. Kidwell, I. R. Beattie, B. D. Schmuck, "Enhancing Educational Motivation among Native High Schoolers: Cutting Edge Nanoscience Placed in an Environmental Water Quality Context", (2007). Innovations 2007, Web Publication, Editor(s): W. Aung, et al. iNEER, Chapter 44, pp. 484-493.

 

Web-based Curriculum Development:

1. NSF funded Combined Research and Curriculum Development: Nontraditional Manufacturing (Laser Machining Process), http://www.columbia.edu/cu/mechanical/mrl/ntm/pgIndex.html

2. NSF funded Combined Research and Curriculum Development: Nontraditional Manufacturing (Virtual Reality Modeling), http://www.columbia.edu/cu/mechanical/mrl/ntm/images/virtualreal.htm

 

US Patent

1.              G.J. Cheng and Y.L.Yao, “Process Design of Laser Forming for Three Dimensional Thin Plates,”  US 60/380,945.

2.              G.J. Cheng, “Laser Dynamic Forming for 3D Micro- and Mesoscale Shapes”, US: 20070039933.

3.              G.J. Cheng, “Stabilized residual stress with dynamic strain aging assisted laser shock peening”, Patent disclosure 11/01/2006 at Houston, TX.