Jun Laboratory Laboratory for Advanced Multiscale Manufacturing (LAMM)

Publications

Journal Publications

  1. Jeon H., M.B.G. Jun, S. Yang, and H. Yun, "Cost-effective Calibration of Collaborative Robot Arm with Single Wire Encoder," International Journal of Precision Engineering and Manufacturing, vol. 24, pp. 1615-1623, 2023.
  2. Akin, S., C. Nath, and M.B.G. Jun, "Selective Surface Metallization of 3D-Printed Polymers by Cold Spray-Assisted Electroless Deposition," ACS Electronic Materials, vol. 5, pp. 5164-5175, 2023.
  3. Park, J., C. Han, H. Yun, and M.B.G. Jun, "Autonomous Robotic Bin Picking Platform Generated from Human Demonstration and YOLOv5," ASME Journal of Manufacturing Science and Engineering, vol. 145, pp. 121006, 2023.
  4. Zhou, F., X. Fu, S. Chen, E. Kim, and M.B.G. Jun, "Fiber Optic Sensor for Smart Manufacturing," International Journal of Precision Engineering and Manufacturing - Smart Technology, vol. 1, pp. 125-136, 2023.
  5. Choi, H.G., Y.I. Byun, C.K. Song, M.B.G. Jun, C. Lee, and S. Kim, "A Solution Procedure to Improve 3D Solid Finite Element Analysis by Enrichment Scheme," vol. 13, pp. 7114, Applied Sciences, 2023.
  6. Akin, S., Y.W. Kim, S. Xu, C. Nath, W. Wu, and M.B.G. Jun, "Cold Spray Direct Writing of Flexible Electrodes for Enhanced Performance Triboelectric Nanogenerators," vol. 100, pp. 27-33, Journal of Manufacturing Processes, 2023.
  7. Tsai, J.T., M.B.G. Jun, and D.F. Bahr, "The Adhesion of Rough Cold Sprayed Metal Coatings on Polymers," vol. 39, pp. 161-173, Surface Engineering, 2023.
  8. Fu, X., F. Zhou, D. Peddireddy, Z. Kang, and M.B.G. Jun, V. Aggarwal, "An FEA Surrogate Model with Boundary Oriented Graph Embedding Approach," vol. 10, pp. 1026-1046, Journal of Computational Design and Engineering, 2023.
  9. Akin, S., P. Wu, C. Nath, J. Chen, and M.B.G. Jun, "A Study on Converging-Diverging Nozzle Design for Cold Spraying of Liquid Droplets toweard Nanocoating Applications," ASME Journal of Manufacturing Science and Engineering, vol. 145, pp. 071011, 2023.
  10. Yun, H., E. Kim, D.M. Kim, H.W. Park, M.B.G. Jun, "Machine Learning for Object Recognition in Manufacturing Applications," International Journal of Precision Engineering and Manufacturing, vol. 24, pp. 683-712, 2023.
  11. Akin, S., S. Jo, and M.B.G. Jun, "A Cold Spray-Based Novel Manufacturing Route for Flexible Electronics," SME Journal of Manufacturing Processes, vol. 86, pp. 98-108, 2023.
  12. Kim, E., H. Yun, O.C. Araujo, and M.B.G. Jun, "Sound Recognition Based on Convolutional Neural Network for Real-time Cutting State Monitoring of Tube Cutting," accepted in International Journal of Precision Engineering -Smart Technology, vol. 1, pp. 1-18, 2023.
  13. Tsai, J.T, M.B.G. Jun, and D.F. Bahr, "Measurement Methods for Quantifying Powder Flowability and Velocity in Cold Spray Systems," Advanced Powder Technology, vol. 34, pp. 103910, 2023.
  14. Fu, X., F. Zhou, H. Yun, E. Kim, S. Chen, and M.B.G. Jun, "Machine Straightness Error Measurement based on Optical Fiber Fabry-Perot Interferometer Monitoring Technique," ASME Journal of Manufacturing Science and Engineering, vol. 145, pp. 0011007, 2023.
  15. Akin, S., S. Lee, S. Jo, D.G. Ruzgar, K. Subramaniam, J.T. Tsai, and M.B.G. Jun, "Cold Spray-based Rapid Production of Printed Flexible Electronics," Additive Manufacturing, vol. 60, pp. 103244, 2022.
  16. Kim, Y.W., S. Akin, H. Yun, S. Xu, W. Wu, and M.B.G. Jun, "Enhanced Performance of Triboelectric Nanogenerator and Sensor via Cold Spray Particle Deposition," ACS Applied Materials and Interfaces, vol. 14, pp. 46410-46420, 2022.
  17. Jang, T.S., S.J. Park, J.E. Lee, J. Yang, S.H. Park, M.B.G. Jun, Y.W. Kim, C. Aranas, J.P. Choi, R.C. Advincula, Y. Zheng, H.L. Jang, N.J. Cho, H.D. Jung, and S.H. Kim, "Topography-Supported Nanoarchitectonics of Hybrid Scaffold for Systematically Modulated Bone Regeneration and Remodeling," Advanced Functional Materials, pp. 220206863, 2022.
  18. Fu, X., K. Song, D.M. Kim, Z. Kang, and M.B.G. Jun, "Geometrical Simulation Model for Milling of Carbon Fiber Reinforced Polymers (CFRP)," International Journal of Precision Engineering and Manufacturing, vol. 23, pp. 1237-1260, 2022.
  19. Yun, H., H.J. Kim, Y.H. Jeong, and M.B.G. Jun, "Autoencoder-based anomaly detection of industrial robot arm using stethoscope based internal sound sensor," Journal of Intelligent Manufacturing, 2022, doi: https://doi.org/10.1007/s10845-021-01862-4.
  20. Gao, J., N. Kedir, J.A. Hermandez, F. Zhou, J.T. Tsai, T.N. Tallman, M.B.G. Jun, and W. Chen, "Dynamic failure of composite strips under reverse ballistic impact Corresponding," International Journal of Mechanical Sciences, vol. 234, pp. 107700, 2022.
  21. Gabor, T., H. Yun, S. Akin, K.H. Kim, J.K. Park, and M.B.G. Jun, "Continuous Coaxial Nozzle Designs for Improved Powder Focusing in Direct Laser Metal Deposition," Journal of Manufacturing Processes, vol. 83, p. 116-128, 2022.
  22. Song, K., G. Kim, H. Yun, B.K. Min, M.B.G. Jun, "Machining Sound Analysis for the Effects of Fiber Bending on Cutting Mechanisms during Carbon Fiber Reinforced Plastic Composite Milling," Composites Part B: Engineering, vol. 241, pp. 110019, 2022.
  23. Park, J., M.B.G. Jun, and H. Yun, "Development of Robotic Bin Picking Platform with Cluttered Objects using Human Guidance and Convolutional Neural Network (CNN)," Journal of Manufacturing Systems, vol. 63, pp. 539-549, 2022.
  24. Jung, K., S.H. Kweon, M.B.G. Jun, Y.H. Jeong, and S.H. Yang, "CNN-based Human Recognition and Extended Kalman Filter-based Position Tracking Using 306o LiDAR," Journal of the Korean Society for Precision Engineering, vol. 39, pp. 575-582, 2022.
  25. Tsai, J.T., S. Akin, F. Zhou, M.S. Park, D. Bahr, and M.B.G. Jun, "Electrically Conductive Metallized Polymers by Cold Spray and Co-electroless Deposition," ASME Open Journal of Engineering, vol. 1, pp. 011007, 2022.
  26. Kim, G., K. Song, M.B.G. Jun, Y.H. Jeong, T.G. Kim, B.K. Min, "The Effect of Fiber Bending Induced Matrix Shear Behavior on Machine Surface Quality in Carbon Fiber Reinforced Plastic Machining," Composite Structures, 2022, doi: https://doi.org/10.1016/j.compstruct.2022.115343.
  27. Chang, T., S. Akin, M.K. Kim, L. Murray, B. Kim, S. Cho, S. Hur, S. Teke, L. Couetil, M.B.G. Jun, and C.H. Lee. "Programmable Dual Regime Spray for Large-scale and Custom-designed Electronic Textiles," Advanced Materials, 2022, doi: https://doi.org/10.1002/adma.202108021.
  28. Fu, X., D. Peddireddy, V. Aggarwal, and M.B.G. Jun, "Improved Dexel Representation: A 3D CNN Geometry Descriptor for Manufacturing CAD," IEEE Transactions on Industrial Informatics, 2022, doi: https://doi.org/10.1109/TII.2021.3136167.
  29. Yun, H., H.J. Kim, Y.H. Jeong, and M.B.G. Jun, "Autoencoder-based anomaly detection of industrial robot arm using stethoscope based internal sound sensor," Journal of Intelligent Manufacturing, 2022, doi: https://doi.org/10.1007/s10845-021-01862-4.
  30. Jo, S., S. Akin, M. Park, and M.B.G. Jun, "Selective Metallization on Glass Surface by Laser Direct Writing Combined with Supersonic Particle Deposition," Manufacturing Letters, 2022, doi: https://doi.org/10.1016/j.mfglet.2021.07.009.
  31. Bhullar, S., H. Lekesiz, A.A. Karaca, Y. Cho, S.M. Willerth, and M.B.G. Jun, "Characterizing the Mechanical Performance of a Bare-metal Stent with an Auxetic Cell Geometry," vol. 12, pp. 910, Applied Sciences, 2022.
  32. Yun, H. and M.B.G. Jun, "Immersive and Interactive Cyber-Physical System (I2CPS) and Virtual Reality Interface for Human Involved Rototic Manufacturing," Journal of Manufacturing Systems, vol. 62, pp. 234-248, 2022.
  33. Han, C., K.B. Kim, S.W. Lee, M.B.G. Jun, and Y.H. Jeong, "Thrust Force-based Tool Wear Estimation using Discrete Wavelet Transformation and Artificial Neural Network in CFRP Drilling," Journal of Precision Engineering and Manufacturing, vol. 22, pp. 1527-1536, 2021.
  34. Akin, S., P. Wu, J.T. Tsai, C. Nath, J. Chen, and M.B.G. Jun, "A Study on Droplets Dispersion and Deposition Characteristics under Supersonic Spray Flow for Nanomaterials Coating Applications," Surface and Coatings Technology, vol. 426, pp. 127788, 2021.
  35. Elgnemi, T., V. Songmene, J. Kouam, M.B.G. Jun, and A.M. Samuel, "Experimental Investigation on Dry Routing of CFRP Composite: Temperature, Forces, Tool Wear and Fine Dust Emission," Materials, vol. 14, pp. 5697, 2021.
  36. Zhou, F., P. Kung, X. Li, V. Behjat, and M.B.G. Jun, "Modeling of a Sampled Apodized Fiber Bragg Grating Moisture Sensor," Optical Fiber Technology, vol. 65, pp. 102630, 2021.
  37. Zhou, F., W. Duan, X. Li, J.T. Tsai, and M.B.G. Jun, "High Precision In-Situ Monitoring of Electrochemical Machining Process Using an Optical Fiber Fabry-P?rot Interferometer Sensor," vol. 68, pp. 180-188, Journal of Manufacturing Processes, 2021.
  38. Seo, Y., J. Nam, H. Yun, M.B.G. Jun, and D. Lee, "Effect of Au-Coating on the Laser Spot Cutting on Spring Contact Probe (SCP) for Semi-conductor Inspection," vol. 14, pp. 3300, Materials, 2021.
  39. Duan, W., X. Mei, Z. Fan, B. Liu, R. Wang, and M.B.G. Jun, "Removal of Recast Layer in Laser Drilled Film Cooling Holes by a Two-step Inner Streaming Electrochemical Technique," vol. 31, pp. 075006, Journal of Micromechanics and Microengineering, 2021.
  40. Jeon, H.S., J.H. Kim, M.B.G. Jun, and Y.H. Jeong, "Fabrication of Thermochromic Membrane and Its Characteristics for Fever Detection," vol. 14, pp. 3460, Materials, 2021.
  41. Elgnemi, T., M.B.G. Jun, V. Songmene, and A.G. Samuel, "Milling Performance of CFRP Composite and Atomized Vegetable Oil as a Function of Fiber Orientation," vol. 14, Materials, pp. 2062, 2021.
  42. Gao, J., Z. Guo, J.A. Hermandez, F. Zhou, Y. Nie, J. Gao, B.H. Lim, N. Kedir, X. Zhai, J. Wang, J.T. Tsai, F. DeCarlo, P.D. Shevchenko, T.N. Tallman, M.B.G. Jun, G.R. Palmese, and W. Chen, "Transverse Impact by RCCs on S-Glass and Kevlar® FRC Strips," vol. 146, Composites Part A, pp. 106425, 2021.
  43. Tsai J.T., S. Akin, F. Zhou, D.F. Bahr, and M.B.G. Jun, "Establishing a Cold Spray Particle Deposition Window on Polymer Substrate," vol. 30, Journal of Thermal Spray Technology, pp. 1069-1080, 2021. *Selected as an Editor's Choice Article.
  44. Peddireddy, D., X. Fu, A. Shankar, H. Wang, B.G. Joung, V. Aggarwal, J.W. Sutherland, and M.B.G. Jun, "Identifying Machinability and Machining Processes using Deep 3D Convolutional Networks," vol. 64, Journal of Manufacturing Processes, pp. 1336-1348, 2021.
  45. Tsai, J.T., L.K. Lin, S.T. Lin, L. Stanciu, and M.B.G. Jun, "The influence of Bi2O3 glass powder in the silver paste and the impact on silicon solar cell substrates," Materials and Design, vol. 200, pp. 109453, 2021.
  46. Akin, S., J.T. Tsai, M. Park, Y.H. Jeong, and M.B.G. Jun, "Fabrication of Electrically Conductive Patterns on Acrylonitrile-Butadiene-Styrene Polymer Using Low-Pressure Cold Spray and Eletroless Plating," vol. 8, ASME Journal of Micro and Nano Manufacturing, pp. 041014, 2021.
  47. Zhou, F., S. Jo, X. Fu, J.T. Tsai, and M.B.G. Jun, "Fabrication of Optical Fiber Sensors Based on Femtosecond Laser Micro Machining," ASME Journal of Micro and Nano Manufacturing, vol. 8, pp. 041010, 2021.
  48. Zhou, F, J.T Tsai, S. Jo, G. Kim, P.C. Lee, and M.B.G. Jun, "In-Situ Monitoring of Solidification Process of PVA Solution by Fiber Optic Sensor Technique," IEEE Sensors, vol. 21, pp. 6170-6178, 2021.
  49. Wang, R., X. Dong, K. Wang, X. Sun, Z. Fan, W. Duan, and M.B.G. Jun, "Polarization Effect on Hole Evolution and Periodic Microstructures in Femtosecond Laser Drilling of Thermal Barrier Coated Superalloys," Applied Surface Science, vol. 537, pp. 148001, 2021.
  50. Joe, H.E., F. Zhou, S.T. Yun, and M.B.G. Jun, "Detection and Quantification of Underground CO2 Leakage into the Soil using the Fibre-Optic Interferometric Sensor," Optical Fiber Technology, vol. 60, pp. 102375, 2020.
  51. Kim, K.B., J.H. Seo, T.G. Kim, M.B.G. Jun, and Y.H. Jeong, "Comparative Analysis and Monitoring of Tool Wear in Carbon Fiber Reinforced Plastic Drilling," Journal of the Korean Society for Precision Engineering, vol. 37, pp. 813-818, 2020.
  52. Samuel, J., M.B.G. Jun, B. Ozdoganlar, A. Honegger, M. Vogler, and S.G. Kapoor, "Micro/Meso-Scale Mechanical Machining 2020: A Two Decade State-of-the-field Review," ASME Journal of Manufacturing Science and Engineering, vol. 142, pp. 110809-1, 2020.
  53. Zhou, F.F., H. Su, H.E. Joe, and M.B.G. Jun, "Temperature Insensitive Fiber Optical Refractive Index Probe with Large Dynamic Range at 1,550 nm," Sensor and Actuators A: Physical, vol. 312, pp. 112102, 2020.
  54. Peddireddy, D., X. Fu, H. Wang, B.G. Joung, V. Aggarwal, J.W. Sutherland, and M.B.G. Jun, "Deep Learning Based Approach for Identifying Conventional Machining Processes from CAD Data," Procedia Manufacturing, vol. 48, pp. 915-925, 2020.
  55. Yun, H., H. Kim, E. Kim, and M.B.G. Jun, "Development of Internal Sound Sensor using Stethoscope and it Applications for Machine Monitoring," Procedia Manufacturing, vol. 48, pp. 1072-1078, 2020.
  56. Nazeri, K., F. Ahmed, V. Ahsani, H.E. Joe, C. Bradley, E. Toyserkani, and M.B.G. Jun, "Hollow-Core Photonic Crystal Fiber Mach-Zehnder Interferometer for Gas Sensing," Sensors, vol. 20, pp. 2087, 2020.
  57. Akin, S., T. Gabor, S. Jo, H.E. Joe, J.T. Tsai, Y. Park, C.H. Lee, M.S. Park, and M.B.G. Jun, "Dual Regime Spray Deposition Based Laser Direct Writing of Metal Patterns on Polymer Substrates," ASME Journal of Micro and Nano Manufacturing, vol. 8, pp. 024511-1-7, 2020.
  58. Zhao, G., X. Cao, W. Xiao, Q. Liu, and M.B.G. Jun, "STEP-NC Feature-oriented High-efficient CNC Machining Simulation," International Journal of Advanced Manufacturing Technology, vol. 106, pp. 2263-2375, 2020.
  59. Lei, S., X. Zhao, X. Yu, A. Hu, S. Vukelic, M.B.G. Jun, H.E. Joe, Y.L. Yao, and Y.C. Shin, "Ultrafast Laser Applications in Manufacturing Processes: A State of the Art Review," ASME Journal of Manufacturing Science and Engineering, vol. 142, pp. 031005-1-28, 2020.
  60. Ahmed, F.A., V. Ahsani, K. Nazeri, E. Marzband, C. Bradley, E. Toyserkani, and M.B.G. Jun, "Monitoring of Carbon Dioxide Gas using Hollow-core Photonic Crystal Fiber Mach-Zehnder Interferometer," Sensors, vol. 19, pp. 3357, 2019.
  61. Moradi, V. F. Ahmed, M.B.G. Jun, A. Blackburn, and R. Herring, "Acid-treated F-doped TiO2 as a High Performance Photocatalyst used for Degradation of Phenol under Visible Light Irradiation," Journal of Environmental Sciences, vol. 83, pp. 183-194, 2019.
  62. Lee, W.J., H. Wu, H. Yun, H. Kim, M.B.G. Jun, J.W. Sutherland, "Predictive Maintenance of Machine Tool Systems Using Artificial Intelligence Techniques Applied to Machine Condition Data," Procedia CIRP, vol. 80, pp. 506-511, 2019.
  63. Kang, Z., Y. Fu., D.M. Kim, H.E. Joe, X. Fu, H.W. Park, and M.B.G. Jun, "From Macro to Micro, Evolution of Surface Structures on Cutting Tools: A review," JMST Advances, vol. 1, pp. 89-106, 2019.
  64. Ahsani, V., F. Ahmed, M.B.G. Jun, and C. Bradley, "Tapered Fiber-Optic Mach-Zehnder Interferometer for Ultra-High Sensitive Measurement of Refractive Index," Sensors, vol. 19, pp. 1652, 2019.
  65. Nguyen, T., J. Nolan, H. Park, S. Lam, M. Fattah, H.E. Joe, M.B.G. Jun, H. Lee, S.J. Kim, R. Shi, H. Lee, "Facile Fabrication of Flexible Glutamate Biosensor using Direct Writing of Platinum Nanoparticle-Based Nanocomposite Ink," Biosensors and Bioelectronics, vol. 131, pp. 257-266, 2019.
  66. Ahmed, F., V. Ahsani, A. Saad, and M.B.G. Jun, "Measurement of In-fiber Refractive Index Change using Mach-Zehnder Interferometer," IEEE Photonics Technology Letters, vol. 31, pp. 74-77, 2019.
  67. Rukosuyev, M., S. Baqar, J. Nam, H. Yun, and M.B.G. Jun, "Flame Assisted Spray Pyrolysis Using Annular Flame Nozzle with Decoupled Velocity Control," Journal of Manufacturing and Material Processing, vol. 2, 75, 2018.
  68. Kang, Z., Y. Fu, X. Fu, and M.B.G. Jun, "Performance of Volcano-like Laser Textured Cutting Tools: An Experimental and Simulative Investigation," Lubricants, vol. 6, 98, 2018.
  69. Joe, H.E., E.G. Kang, M.B.G. Jun, and B.K. Min, "A Review of State of the Art in Electron Beam and Ion Beam Machining," Journal of Korean Society of Precision Engineers, vol. 35, pp. 241-252, 2018.
  70. Joe, H.E., H. Yun, S.H. Jo, M.B.G. Jun, and B.K. Min, "Optical Fiber Sensors for Environmental Monitoring," International Journal of Precision Engineering and Manufacturing - Green Technology, vol. 5, pp. 173-191, 2018.
  71. Bhullar, S. D. Rana, B. Ozsel, M. Orhan, M.B.G. Jun, H. Buttar, S. Ostrovidov, M. Ramalingam, "Development of Silver-Based Bactericidal Composite Nanofiber by Airbrushing," Journal of Nanoscience and Nanotechnology, vol. 18, pp. 2951-2955, 2018.
  72. Song, K., M.G. Gang, M.B.G. Jun, B.-K. Min, "Cryogenic Machining of PDMS for Microfluidic Channel Valve Fabrication," International Journal of Precision Engineering and Manufacturing, vol. 18, pp. 1711-1717, 2017.
  73. Cho, Y., F. Ahmed, H.E. Joe, H. Yun, B.K. Min, and M.B.G. Jun, "Fabrication of Screw-shaped Long Period Fiber Grating for Refractive Index Sensing," IEEE Photonics Technology Letter, vol. 29, pp. 2242-2245, 2017.
  74. Joe, H.E., W.S. Lee, M.B.G. Jun, N.C. Park, and B.-K. Min, "Material Interface Detection During Focused Ion Beam Machining of a Multilayered Structure for Plasmonic Applications," Ultramicroscopy, vol. 184, pp. 37-43, 2017.
  75. Nam, J., B. Valinasab, and M.B.G. Jun, "Performance Evaluation of Atomization-Based Uniform Spray Coating for 3D Scanning," Journal of Korean Society for Precision Engineering, vol. 34, pp. 689-693, 2017.
  76. Rukosuyev, M., S. Baqar, and M.B.G. Jun, "Development and Evaluation of Flame Assisted Dual Velocity Coating System," ASME Journal of Micro and Nano Manufacturing, vol. 5, pp. 044501-1-5, 2017.
  77. Elgnemi, T., K. Ahmadi, V. Songmene, J. Nam, and M.B.G. Jun, "Effects of Atomization-based Cutting Fluid Sprays in Milling of Carbon Fiber Reinforced Polymer Composites," Journal of Manufacturing Processes, vol. 30, pp. 133-140, 2017.
  78. Moradi, V., M.B.G. Jun, A. Blackburn, and R.A. Herring, "Significant Improvement in Visible Light Photocatalytic Activity of Fe Doped TiO2 using Acid Treatment Process," Applied Surface Science, vol. 427, pp. 791-799, 2017.
  79. Lee, J., X. Yao, G. Li, M.B.G. Jun, and P.C. Lee, "Measurement Methods for Solubility and Diffusivity of Gases and Supercritical Fluids in Polymer and its Applications," Polymer Reviews, vol. 57, pp. 695-747, 2017.
  80. Bhullar, S., D. Rana, H. Lekesiz, A.C. Bedeloglu, J. Ko, Y. Cho, Z. Aytac, T. Uyar, M.B.G. Jun, and M. Ramalingam, "Design and Fabrication of Auxetic PCL Nanofiber Membranes for Biomedical Applications," Materials Science and Engineering: C, vol. 81, pp. 334-340, 2017.
  81. Lekesiz, H., S. Bhullar, A.A. Karaca, and M.B.G. Jun, "Mechanical Characterization of Auxetic Stainless Steel Thin Sheets with Reentrant Structure," vol. 26, Smart Materials and Structures, pp. 085022, 2017.
  82. Kim, U., N. Morita, D.W. Lee, M.B.G. Jun, and J.W. Park, "The Possibility of Three-dimensional Nanoprinting via Atomic Force Microscope-based Pulse Electrochemical Nanopatterning," vol. 28, Nanotechnology, pp. 195302, 2017.
  83. Luo, S., A. Bayesteh, A., J. Ko, Z. Dong, and M.B.G. Jun, "Numerical Simulation of Chip Ploughing Volume in Micro Ball-End Mill Machining," vol. 18, International Journal of Precision Engineering and Manufacturing, pp. 915-922, 2017.
  84. Luo, S., Z. Dong, and M.B.G. Jun, "Optimal Tool Orientation Generation and Chip Volume/Cutting Force Predictions for 5-axis CNC Machining of Curved Surfaces Using Flat-end Mills," Computer-Aided Design and Applications, vol. 14, pp. 331-342, 2017.
  85. Rukosuyev, M., A. Esmaeilirad, S.A. Baqar, and M.B.G. Jun, "Uniform Silver Nanoparticles Coating using Dual Regime Spray Deposition System for Superhydrophilic and Antifogging Applications," Journal of Coatings Technology and Research, vol. 14, pp. 347-354, 2017.
  86. Luo, S., Z. Dong, and M.B.G. Jun, "Chip Volume and Cutting Force Calculations in 5-axis CNC Machining of Free-form Surfaces Using Flat-end Mill," International Journal of Advanced Manufacturing Technology, vol. 90, pp. 1145-1154, 2017.
  87. Esmaeilirad, A., J. Ko, M. Rukosuyev, J.K. Lee, P.C. Lee, and M.B.G. Jun, "The Effect of Nozzle-Exit-Channel Shape on Resultant Fiber Diameter in Melt Electrospinning," Materials Research Express, vol. 4, pp. 015302, 2017.
  88. Ko, J., V. Ahsani, S.X. Yao, N. Mohtaram, P.C. Lee, and M.B.G. Jun, "Fabricating and Controlling PCL Electrospun Microfibers using Filament Feeding Melt Electrospinning Technique," Journal of Micromechanics and Microengineering, vol. 27, pp. 025007, 2016.
  89. Bhullar, S.K., D. Rana, B.K. Ozsel, R. Yadav, G. Kaur, M. Chintamaneni, H.S. Buttar, M.B.G. Jun, and M. Ramalingam, "A Comparative Study of the Antibacterial Activity of Rosemary Extract Blended with Polymeric Biomaterials," Journal of Bionanoscience, vol. 10, pp. 326-330, 2016.
  90. Saad, Akram, Y. Cho, F. Ahmed, and M.B.G. Jun, "Numerical Approach to Modeling and Characterization of Refractive Index Changes and a Long Period Grating Fabricated by Femtosecond Laser," Materials, vol. 9, pp. 941, 2016.
  91. Ahmed, F., V. Ahsani, L. Melo, P. Wild, and M.B.G. Jun, "Miniaturized Tapered Photonic Crystal Fiber Mach-Zehnder Interferometer for Enhanced Refractive Index Sensing," IEEE Sensors, vol. 16, pp. 8761-8766, 2016.
  92. Luo, S., Z. Dong, and M.B.G. Jun, "Numerical Simulation of Chip Ploughing Volume and Forces in 5-axis CNC Micro-milling Using Flat-end Mills," Procedia Manufacturing, vol. 5, pp. 348-361, 2016.
  93. Agbay, A., J. Edgar, M. Robinson, T. Styan, K. Wilson, J. Schroll, J. Ko, N.K. Mohtaram, M.B.G. Jun, and S. Willerth, "Biomaterial Strategies for Delivering Stem Cells as a Treatment for Spinal Cord Injury," Cells Tissues Organs, vol. 202, pp. 42051, 2016.
  94. Rukosuyev, M., O. Barannyk, P. Oshkai, and M.B.G. Jun, "Design and Application of Nanoparticle Coating System with Decoupled Particle Generation and Deposition Control," Journal of Coatings Technology and Research, vol. 13, pp. 769-779, 2016.
  95. Ahmed, F., V. Ahsani, A. Saad, and M.B.G. Jun, "Bragg Grating Embedded in Mach-Zehnder Interferometer for Refractive Index and Temperature Sensing," IEEE Photonics Technology Letters, vol. 28, pp. 1968-1971, 2016.
  96. Luo, S., R. Bayesteh, Z. Dong, and M.B.G. Jun, "3-Axis Milling Algorithm Development for Carbon Fiber Reinforced Polymer (CFRP) Composites," Journal of Korean Society of Precision Engineering, vol. 33, pp. 447-452, 2016.
  97. Elfurjani, S., J. Ko, and M.B.G. Jun, "Micro-scale Hole Profile Measurement using Rotating Wire Probe and Acoustic Emission Contact Detection," Measurement, vol. 89, pp. 215-222, 2016.
  98. Bayesteh, A., J. Ko, and M.B.G. Jun, "Micro Flat End Milling Simulation Model with Instantaneous Ploughing Volume Prediction," ASME Journal of Micro and Nano Manufacturing, vol. 4, pp. 021004, 2016.
  99. Lee, J., J. Ko, P.C. Lee, and M.B.G. Jun, "Manufacturing and Characterization of Encapsulated Microfibers with Different Molecular Weight Poly (e-caprolactone) (PCL) Resins Using a Melt Electrospinning Technique," Materials Research Express, vol. 3, pp. 025301, 2016.
  100. Ahmed, F. and M.B.G. Jun, "Microfiber Bragg Grating Sandwiched Between Standard Optical Fibers for Enhanced Temperature Sensing," IEEE Photonics Technology Letters, vo. 28, pp. 685-688, 2016.
  101. Bhullar S., I. Cerkez, A. Sezer, and M.B.G. Jun, "Swelling Behavior of Hydrogels within Auxetic PTFE Jacket," Polymer-Plastics Technology and Engineering, vol. 54, pp. 1787-1793, 2015.
  102. Bhullar S., J. Ko, Y. Cho, and M.B.G. Jun, "Fabrication and Characterization of Non-woven Auxetic Polymer Stent," Polymer-Plastics Technology and Engineering, vol. 54, pp. 1553-1559, 2015.
  103. Esmaeilirad, A., M. Rukosuyev, M.B.G. Jun, and F.C.J.M. van Veggel, "A Cost-effective Method to Create Physically and Thermally Stable and Storable Super-hydrophobic Aluminum Alloy Surfaces," Surface and Coatings Technology, vol. 285, pp. 227-234, 2015.
  104. Ahsan, M.S., M.S. Lee, M.K. Hasan, Y.C. Noh, I.B. Sohn, F. Ahmed, and M.B.G. Jun, "Formation Mechanism of Self-Organized Nano-Ripples on Quartz Surface using Femtosecond Laser Pulses," International Journal of Light and Electron Optics, vol. 126, pp. 5979-5983, 2015.
  105. Mohtaram, N., J. Ko, A. Agbay, D. Rattray, P. O'Neill, A. Rajwani, R. Vansandani, H. Thu, M.B.G. Jun, and S. Willerth, "Development of a Glial Cell-Derived Neurotrophic Factor-Releasing Artificial Dura for Neural Tissue Engineering Applications," Journal of Materials Chemistry B, vol. 3, pp. 7974-7985, 2015.
  106. Bayesteh, A., F. Ahmed, J. Ko, and M.B.G. Jun, "Improvement of Computer-Aided Manufacturing (CAM) Software for Laser machining," Journal of Korean Society of Manufacturing Technology Engineers, vol. 24, pp. 375-385, 2015.
  107. Bhullar, S., B. Kaya, and M.B.G. Jun, "Development of Bioactive Packaging Structure using Melt Electrospinning," Journal of Polymers and the Environment, vol. 23, pp. 416-423, 2015.
  108. Joe, H.E., J.H. Park, S.H. Kim, G. Kim, M.B.G. Jun, and B.K. Min, "Effects of Coating Material on the Fabrication Accuracy of Focused Ion Beam Machining of Insulators," Japanese Journal of Applied Physics, vol. 54, pp. 096602-1-5,2015.
  109. Ahmed, F., H.E. Joe, B.K. Min, and M.B.G. Jun, "Characterization of Refractive Index Change and Fabrication of Long Period Gratings in Pure Silica Fiber by Femtosecond Laser Radiation," Optics and Laser Technology, vol. 74, pp. 119-124, 2015.
  110. Ko. J., S. Bhullar, Y. Cho, P.C. Lee, and M.B.G. Jun, "Design and Fabrication of Auxetic Stretchable Force Sensor for Hand Rehabilitation," Smart Materials and Structures, vol. 24, pp. 075027 (8pp), 2015.
  111. Ko, J., S. Jun, J. Lee, P.C. Lee, and M.B.G. Jun, "Effects of Molecular Weight and Temperature on Fiber Diameter of Poly (e-caprolactone) Melt Electrospun Fiber," Journal of Korean Society of Manufacturing Technology Engineers, vol. 24, pp. 160-165, 2015.
  112. Valinasab, B., M. Rukosuyev, J. Lee, J. Ko, and M.B.G. Jun, "Improvement of Optical 3D Scanner Performance using Atomization-based Spray Coating," Journal of Korean Society of Manufacturing Technology Engineers, vol. 24, pp. 25-32, 2015.
  113. Ko, J., N.K. Mohtaram, P.C. Lee, S.W. Willerth, and M.B.G. Jun, "Mathematical Model for Predicting Topographical Properties of Poly (e-caprolactone) Melt Electrospun Scaffolds Including the Effects of Temperature and Linear Transitional Speed," Journal of Micromechanics and Microengineering, vol. 25, pp. 045018 (11 pp), 2015.
  114. Nam, E., C.Y. Lee, M.B.G. Jun, and B.K. Min, "Ductile Mode Electrochemical Oxidation Assisted Machining for Glassy Carbon," Journal of Micromechanics and Microengineering, vol. 25, pp. 045021 (8 pp), 2015.
  115. Ko, J., D. Kan, and M.B.G. Jun, "Combining Melt Electrospinning and Particulate Leaching for Fabrication of Porous Microfibers," Manufacturing Letters, vol. 4, pp. 5-8, 2015.
  116. Elfurjani, S., A. Bayesteh, S.S. Park, and M.B.G. Jun, "Dimensional Measurement Based on Rotating Wire Probe and Acoustic Emission," Measurement, vol. 59, pp. 329-336, 2015.
  117. Mohtaram, N.K., J. Ko, C. King, L. Sun, N. Muller, M.B.G. Jun, and S.M. Willerth, "Electrospun biomaterial scaffolds with varied topographies for neuronal differentiation of human induced pluripotent stem cells," Journal of Biomedical Materials Research: Part A, vol. 103, pp. 2591-2601, 2014.
  118. Mohtaram, N.K., J. Ko, A. Montgomery, M. Carlson, S. Lin, A. Wong, M. Robinson, M.B.G. Jun, and S.M. Willerth, "Multifunctional Electrospun Scaffolds for Promoting Neuronal Differentiation of Induced Pluripotent Stem Cells," Journal of Biomaterials and Tissue Engineering, vol. 4, pp. 906-914, 2014.
  119. Burton, G., L. Melo, S. Warwick, M.B.G. Jun, B. Bao, D. Sinton, and P. Wild, "Fiber Refractometer to Detect and Distinguish Carbon Dioxide and Methane Leakage in the Deep Ocean," International Journal of Greenhouse Gas Control, vol. 31, pp. 41-47, 2014.
  120. Bhullar, S.K., A. Bedeloglu, and M.B.G. Jun, "Characterization and Auxetic Effect of Polytetrafluoroethylene Tubular Structure," International Journal of Advanced Science and Engineering, vol. 1, pp. 8-13, 2014.
  121. Zhang, Y. and M.B.G. Jun, "Feasibility of Lignin as Additive in Metalworking Fluids for Micro-Milling," Journal of Manufacturing Processes, vol. 16, pp. 503-510, 2014.
  122. Rukosuyev, M., J. Lee, S.J. Cho, G. Lim, and M.B.G. Jun, "One-step Fabrication of Superhydrophobic Hierarchical Structures by Femtosecond Laser Ablation," Applied Surface Science, vol. 313, pp. 411-417, 2014.
  123. Smith, L., F. Ahmed, A. Jooshesh, J. Zhang, M.B.G. Jun, and T. Darcie, "THz Field Enhancement by Antenna Coupling to a Tapered Thick Slot Waveguide," Journal of Lightwave Technology, vol. 32, pp. 3676-3682, 2014.
  124. Ahmed, F. and M.B.G. Jun, "Filament-Based Fabrication and Performance Analysis of Fiber Bragg Grating Sensors using Ultrashort Pulse Laser," Journal of Micro and Nano-Manufacturing, vol. 2, pp. 021007 (6pp), 2014.
  125. Burton, G., C.S. Goo, Y. Zhang, and M.B.G. Jun, "Use of Vegetable Oil in Water Emulsion Achieved Through Ultrasonic Atomization as Cutting Fluids in Micro-Milling," Journal of Manufacturing Processes, vol. 16, pp. 405-413, 2014.
  126. Ko, J., S.K. Bhullar, N.K. Nohtaram, S.M. Willerth, and M.B.G. Jun, "Using Mathematical Modeling to Control Topographical Properties of Poly (e-caprolactone) Melt Electrospun Scaffolds," Journal of Micromechanics and Microengineering, vol. 24, pp. 065009 (13pp), 2014.
  127. Bhullar, S.K., J. Ko, F. Ahmed, and M.B.G. Jun, "Design and Fabrication of Stent with Negative Poisson's Ratio," International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, vol. 8, pp. 213-219, 2014.
  128. Ko, J.H., K. Mohtaram, F, Ahmed, A. Montgomery, M. Carlson, P.C. Lee, S. Willerth, and M.B.G. Jun, "Fabrication of Poly (e-caprolactone) Microfiber Scaffolds with Varying Topography and Mechanical Properties for Stem Cell-based Tissue Engineering Applications," Journal of Biomaterials Science: Polymer Edition, vol. 25, pp. 1-17, 2014.
  129. Ahmed, F., M.S. Ahsan, M.B.G. Jun, and M.S. Lee, "Near-field Modification of Femtosecond Laser Beam to Enhance Single Shoot Filamentation," Applied Physics A, vol. 114, pp. 1161-1165, 2014.
  130. Zhang, Y. and M.B.G. Jun, "Mixed Jet of Independently Atomized Water and Oil Sprays as Cutting Fluids in Micro-Milling," Manufacturing Letters, vol. 1, pp. 13-16, 2013.
  131. Bhullar, S.K., A.T.M. Hewage, A. Alderson, K. Alderson, and M.B.G. Jun, "Influence of Negative Poisson's Ratio on Stent Applications," Advances in Materials, vol. 2, pp. 42-27, 2013.
  132. Mahmoodi, M., G. Mostofa, S.S. Park, and M.B.G. Jun, "Characterization and Micro Milling of Flow Induced Aligned Carbon Nanotube Nanocomposites," ASME Journal of Micro and Nano-Manufacturing, vol. 1, pp. 011009, 2013.
  133. Mostofa, M. G., M. Malekian, S.S. Park, and M.B.G. Jun, "Micro Mechanical Machining of Soda Lime Glass," Journal of Advanced Manufacturing Technology, vol. 67, pp. 1139-1150, 2013.
  134. Goo, C.S., G. Lim, and M.B.G. Jun, "Experimental Analysis of an Acoustic Emission-Based Tool Tip Touch-Off Detection For Micro End Milling," Journal of Manufacturing Technology Research, vol. 6, pp. 1-15, 2012.
  135. Goo, C.S., M.B.G. Jun, A. Saito, "Probing System for Measurement of Micro-Scale Components," SME Journal of Manufacturing Processes, vol. 14, pp. 174-180, 2012.
  136. Jun, M.B.G., C.S. Goo, M. Malekian, and S.S Park, "A New Mechanistic Approach for Micro End Milling Force Modeling," ASME Journal of Manufacturing Science and Engineering, vol. 134, pp. 011006-1-9, 2012.
  137. Malekian, M., M.G. Mostafa, S.S Park, and M.B.G. Jun, "Modeling of Minimum Uncut Chip Thickness in Micro Machining of Aluminum," Journal of Materials Processing Technology, vol. 212, pp. 553-559, 2012.
  138. Ko, J., K. Kolehmainen, F. Ahmed, M.B.G. Jun, and S.M. Willerth, "Towards High Throughput Tissue Engineering: Development of Chitosan-Calcium Phosphate Scaffolds for Engineering Bone Tissue from Embryonic Stem Cells," American Journal of Stem Cells, vol. 1, pp. 81-89, 2011.
  139. Ko, J., M.B.G. Jun, G. Gilardi, E. Haslam, and E.J. Park, "Fuzzy PWM-PID Control of Cocontracting Antagonistic Shape Memory Alloy Muscle Pairs in an Artificial Finger," Mechatronics, vol. 21, pp. 1190-1202, 2011.
  140. Ahsan, M.S., F. Ahmed, Y.G. Kim, M.S. Lee, and M.B.G. Jun, "Colorizing Stainless Steel Surface by Femtosecond Laser Induced Micro/Nano-structures," Applied Surface Science, vol. 257, pp. 7771-7777, 2011.
  141. Rukosuyev M., L. Dutton, J. Ko, and M.B.G. Jun, "Design and Fabrication of a Three Dimensional Commemorative Artistic Plaque," Journal of Mechanics Engineering and Automation, vol. 1, pp. 293-297, 2011.
  142. Malekian, M., D. Strathearn, M. Sajjadi, M. Mahmoodi, S.S. Park, and M.B.G. Jun, "Atomic Force Microscope Probe Based Nanometric Scribing," Journal of Micromechanics and Microengineering, vol. 20, pp. 115016-1-11, 2010.
  143. Rukosuyev, M., C.S. Goo, and M.B.G Jun, "Understanding the Effects of System Parameters of an Ultrasonic Cutting Fluid Application System for Micro-Machining," SME Journal of Manufacturing Processes, vol. 12, pp. 92-98, 2010.
  144. Rukosuyev, M., C.S. Goo, M.B.G. Jun, and S.S. Park, "Design and Development of Cutting Fluid System Based on Ultrasonic Atomization for Micro-Machining," Transactions of NAMRI/SME, vol. XXXVIII, pp. 97-104, 2010.
  145. Jun, M.B.G. and A.C. Araujo, "Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling," Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 132, pp. 014505-1-6, 2010.
  146. Jun, M.B.G., "Effects of Edge Radius, Minimum Chip Thickness, and Elastic Recovery on Specific Cutting Energies in Micro-Machining," Journal of Manufacturing Technology Research, vol. 1, pp. 191-206, 2010.
  147. Malekian, M., S.S. Park, M. Sajjadi, and M.B.G. Jun, "Mechanistic Force Modeling of Micro Ball End Milling Processes" Transactions of NAMRI/SME, vol. XXXVII, pp. 67-74, 2009.
  148. Malekian, M., S.S. Park, and M.B.G. Jun, "Tool Wear Monitoring of Micro Milling Operations," Journal of Materials Processing Technology, vol. 209, pp. 4903-4914, 2009.
  149. Malekian, M., S.S. Park, and M.B.G. Jun, "Modeling of Dynamic Micro-Milling Cutting Forces," International Journal of Machine Tool and Manufacture, vol. 49, pp. 586-598, 2009.
  150. Liu, X., M.B.G. Jun, "Effects of Process Parameters on Surface Location Errors in Micro-Endmilling," Transaction of NAMRI/SME, vol. XXXVI, pp. 277-284, 2008.
  151. Jun, M.B.G, S. Joshi, R.E. DeVor, and S.G. Kapoor, "Experimental Evaluation of An Atomization-Based Cutting Fluid Application System for Micro-Machining," Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 130, pp. 031118-1-8, 2008.
  152. Bourne, K., M.B.G. Jun, S.G. Kapoor, and R.E. DeVor, "An Acoustic Emission-Based Method for Determining Relative Orientation Between a Tool and Workpiece at the Micro-Scale," Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 130, pp. 031101-1-8, 2008.
  153. Balasubramaniam, A., M.B.G. Jun, R.E. DeVor, and S.G. Kapoor, "A Sub-micron Multi-axis Positioning Stage for Micro- and Nano-scale Manufacturing Processes," Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 130, pp. 031112-1-8, 2008.
  154. Jun, M.B.G., S.G. Kapoor, and R.E. DeVor, F. Englert, "Experimental Investigation of Machinability and Tool Wear in Micro-Endmilling," Transaction of NAMRI/SME, vol. XXXVI, pp. 201-208, 2008.
  155. Araujo, A.C., M.B.G. Jun, S,G. Kapoor, and R.E. DeVor, "Experimental Investigation of a Combined Drilling and Thread Milling Process: Thrilling," Transaction of NAMRI/SME, vol. XXXV, pp. 518-527, 2007.
  156. Jun, M.B.G., K. Bourne, R.E. DeVor, and S.G. Kapoor, "Estimation of Effective Error Parameters in High-Speed Micro-Endmilling," International Journal of Machine Tools and Manufacture, vol. 47, pp. 1449-1454, 2007.
  157. Jun, M.B.G., X. Liu, S.G. Kapoor, and R.E. DeVor, "Investigation of the Dynamics of Microend Milling, Part 1: Model Development," Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 893-900, 2006.
  158. Jun, M.B.G., S.G. Kapoor, and R.E. DeVor, "Investigation of the Dynamics of Microend Milling, Part 2: Model Validation and Interpretation," Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 901-912, 2006.
  159. Araujo, A.C., J.S. Silveira, M.B.G. Jun, S.G. Kapoor, and R.E. DeVor, "A Model for Thread Milling Cutting Forces," International Journal of Machine Tools and Manufacture, vol. 46, pp. 2057-2065, 2006.
  160. Bhattacharyya, O., M.B.G. Jun, S.G. Kapoor, and R.E. DeVor, "The Effects of Process Faults and Misalignments on the Cutting Force System and Hole Quality in Reaming," International Journal of Machine Tools and Manufacture, vol. 46, no. 12-13, pp. 1281-1290, 2006.
  161. Jun, M.B.G., S.G. Kapoor, and R.E. DeVor, "The Effect of End Mill Alignment Errors on Vibrations at High Spindle Speeds," Transactions of NAMRI/SME, vol. XXXII, pp. 9-16, 2004.
  162. Jun, M.B.G., O.B. Ozdoganlar, R.E. DeVor, and S.G. Kapoor, "Evaluation of a Spindle-Based Force Sensor for Monitoring and Fault Diagnosis of Machining Operations," International Journal of Machine Tools and Manufacture, vol. 42, pp. 741-751, 2002.
  163. Zhu, W.H., M.B. Jun, and Y. Altintas, "A Fast Tool Servo for Precision Turning of Shafts on Conventional CNC Lathes," International Journal of Machine Tools and Manufacture, vol.41, pp. 953-965, 2001.

Conferences

  1. Akin, S. and and M.B.G. Jun, "Additively Manufactured Polymer Counter Electrodes for Dye-sensitized Solar Cells," World Congress on Micro and Nano Manufacturing, Sep. 18-21, Evanston, IL, USA, 2023.
  2. Kim, E., J. Yuan, J. Lee, H. Yun, M. Fassnacht, S.W. Lee, and M.B.G. Jun, "Real-time Cutting State Monitoring for Micro-Volume Fine Milling MTConnect Framework Based on Sound and Convolutional Neural Network," World Congress on Micro and Nano Manufacturing, Sep. 18-21, Evanston, IL, USA, 2023.
  3. Kim, E., J. Yuan, H. Yun, and M.B.G. Jun, "Sound Monitoring and Applications for Smart Manufacturing using MTConnect Framework and Artificial Intelligence," International Conference on Precision Engineering and Sustainable Manufacturing, July 16-21, Okinawa, Japan, 2023.
  4. Zhou, F., X. Fu, S. Chen, and M.B.G. Jun, "Detection and Identification of Particles on Silicon Wafers Based on Light Scattering and Absorption Spectroscopy and Machine Learning," SME North American Manufacturing Research Conference, June 12-16, New Brunswick, NJ, USA, 2023.
  5. Fu, X., D. Peddireddy, F. Zhou, Y. Xi, V. Aggarwal, X. Li, and M.B.G. Jun, "BREP Compatible Feature Recognition for Manufacturing CAD Models," SME North American Manufacturing Research Conference, June 12-16, New Brunswick, NJ, USA, 2023.
  6. Akin, S., Y.W. Kim, S. Xu, C. Nath, W. Wu, and M.B.G. Jun, "Cold Spray Direct Writing of Flexible Electrodes for Enhanced Performance Triboelectric Nanogenerators," SME North American Manufacturing Research Conference, June 12-16, New Brunswick, NJ, USA, 2023.
  7. Han, C., H. Chun, C. Lee, and M.B.G. Jun, "Stroboscopic Data-Driven Integrated, and Intelligent Machine Learning-Based Algorithms for Semiconductor Wafer Inspection," ASME Manufacturing Science and Engineering Conference, June 12-16, New Brunswick, NJ, USA, 2023.
  8. Akin, S., P. Wu, C. Nath, J. Chen, and M.B.G. Jun, "A Study on the Effect of Nozzle Geometrical Parameters on Supersonic Cold Spraying of Droplets," ASME International Manufacturing Science and Engineering Conference, June 27-July 1, West Lafayette, IN, USA, 2022.
  9. Tsai, J.T., M.B.G. Jun, D.F. Bahr, "Cold Spray Multilayer Metal Build-up on a Polymeric Substrate," ASME International Manufacturing Science and Engineering Conference, June 27-July 1, West Lafayette, IN, USA, 2022.
  10. Gabor, T., S. Akin, J.T. Tsai, S. Jo, F. Al-Najjar, and M.B.G. Jun, "Numerical Studies on Cold Spray Particle Deposition using a Rectangular Nozzle," ASME International Manufacturing Science and Engineering Conference, June 27-July 1, West Lafayette, IN, USA, 2022.
  11. Fu, X., F. Zhou, H. Yun, E. Kim, S. Chen, and M.B.G. Jun, "Machine Straightness Error Measurement based on Optical Fiber Fabry-Perot Interferometer Monitoring Technique," ASME International Manufacturing Science and Engineering Conference, June 27-July 1, West Lafayette, IN, USA, 2022.
  12. Yun, H., J. Park, and M.B.G. Jun, "Development of Autonomous Robotic Bin Picking System using Convolutional Neural Network (CNN) Initially Trained by Human Skills," ASME International Manufacturing Science and Engineering Conference, June 27-July 1, West Lafayette, IN, USA, 2022.
  13. Jeon, H., H. Yun, M.B.G. Jun, Y.H. Jeong, and S. Yang, "Calibration of Collaborative Robot using Wire Encoder," ASME International Manufacturing Science and Engineering Conference, June 27-July 1, West Lafayette, IN, USA, 2022.
  14. Jeon, H.S., J.H. Kim, M.B.G. Jun, M.K. Kwak, G.M. Kim, C.W. Park, Y.H. Jeong, "Calibration of Collaborative Robot using Wire Encoder," ASME International Manufacturing Science and Engineering Conference, June 27-July 1, West Lafayette, IN, USA, 2022.
  15. Jo, S., S. Akin, M.S. Park, and M.B.G. Jun, "An Integrated Method for Selective Metallization on Glass Surface: Laser Direct Writing Coupled with Supersonic Spray Coating," World Congress on Micro and Nano Manufacturing, Sept. 21-23, Bombay, Powai, India, 2021.
  16. Yun, H., E. Kim, and M.B.G. Jun, "Human Expertise Inspired Smart Sensing and Manufacturing," International Conference on Electronics, Communications, and Information Technology (ICECIT), Sept. 14-16, Bangladesh, 2021. (*Keynote paper)
  17. Kim, E., H. Yun, K. Kim, S.W. Cha, and M.B.G. Jun, "Multiple Sound Sensors and Fusion in Modern CNN-based Machine State Prediction," ASME Manufacturing Science and Engineering Conference, June 21-25, Cincinnati, OH, USA, 2021.
  18. Gabor, T., H.E. Joe, S. Akin, K.H. Kim, J.K. Park, and M.B.G. Jun, "Numerical Investigation of Various Coaxial Nozzle Designs for Direct Laser Deposition," ASME Manufacturing Science and Engineering Conference, June 22-26, Cincinnati, OH, USA, 2020.
  19. Akin, S., J.T. Tsai, M.S. Park, Y.H. Jeong, and M.B.G. Jun, "Fabrication of Electrically Conductive Patterns on ABS Polymer using Low-Pressure Cold Spray and Electroless Plating," ASME Manufacturing Science and Engineering Conference, June 22-26, Cincinnati, OH, USA, 2020.
  20. Tsai, J.T., S. Akin, F. Zhou, M.S. Park, D.F. Bahr, and M.B.G. Jun, "Simulation and Characterization of Cold Spray Deposition of Metal Powders on Polymer Substrate Electrically Conductive Application," ASME Manufacturing Science and Engineering Conference, June 22-26, Cincinnati, OH, USA, 2020.
  21. Zhou, F., S. Jo, X. Fu, J.T. Tsai, and M.B.G. Jun, "Fabrication of Optical Fiber Sensors based on Femtosecond Laser Micro Machining," ASME Manufacturing Science and Engineering Conference, June 22-26, Cincinnati, OH, USA, 2020.
  22. Yun, H., H. Kim, E. Kim, and M.B.G. Jun, "Development of Internal Sound Sensor using Stethoscope and its Applications for Machine Monitoring," 48th SME North American Manufacturing Research Conference (NAMRC 48), June 22-26, Cincinnati, OH, USA, 2020.
  23. Akin, S., T. Gabor, S. Jo, Y. Park, J.T. Tsai, C.H Lee, M. Park, and M.B.G. Jun, "Dual Regime Spray Deposition Based Laser Direct Writing of Metal Patterns on Polymer Substrates," World Congress on Micro and Nano Manufacturing (WCMNM), Sep. 10-12, Raleigh, NC, USA, 2019.
  24. Jo, S. and M.B.G. Jun, "CO2 Laser Assisted Ultrafast Laser Machining of Borosilicate Glass," World Congress on Micro and Nano Manufacturing (WCMNM), Sep. 10-12, Raleigh, NC, USA, 2019.
  25. Nazeri, K., V. Ahsani, F. Ahmed, H.E. Joe, M.B.G. Jun, and C. Bradley, "Experimental Comparison of the Effect of the Structure on MZI Fiber Gas Sensor Performance," IEEE Pacific Rim Conference on Communications, Computers and Signal Processing (PACRIM), Aug. 21-23, Victoria, BC, Canada, 2019.
  26. Fu, X., K. Song, D.M. Kim, G. Kim, B.K. Min, and M.B.G. Jun, "Micro-Scale Fiber Cutting Geometry Predictions During Milling of Carbon Fiber Reinforced Polymers (CFRP) Composites," ASME Manufacturing Science and Engineering Conference, June 10-14, Erie, PA, USA, 2019.
  27. Fu, X., K. Song, and M.B.G. Jun, "Geometry-Based Machining Simulation of Carbon Fiber Reinforced Polymer (CFRP) Composites," International Conference on Advanced Materials and Manufacturing, Aug. 20-23, Portland, OR, USA, 2019.
  28. Yun, H., H. Kim, and M.B.G. Jun, "Machine Health Monitoring and Visualization for Smart Manufacturing," US-Korea Conference on Smart Science, Engineering and Health for Livable Communities, Aug. 14-17, Chicago, IL, USA, 2019.
  29. Lee, W.J., H. Wu, H. Yun, H. Kim, M.B.G. Jun, and J.W. Sutherland, "Predictive Maintenance of Machine Tool Systems Using Artificial Intelligence Techniques Applied to Machine Condition Data," 26th CIRP Conference on Life Cycle Engineering (LCE), May 7-9, West Lafayette, IN, USA, 2019.
  30. Fu, X., K. Song, G. Kim, B.K. Min, and M.B.G. Jun, "Delamination Area Prediction during Milling Carbon Fiber Reinforced Polymer Composites based on Fiber Cutting Process Geometry Simulation Software," International Mechanical Engineering Congress and Exposition, Nov. 9-15, Pittsburgh, PA, USA, 2018.
  31. Jo, S., H.E. Joe, A. Guram, and M.B.G. Jun, "Simulation and Characterization of 3D Shape Optical Fiber Sensors Fabricated by Femtosecond Laser," International Mechanical Engineering Congress and Exposition, Nov. 9-15, Pittsburgh, PA, USA, 2018.
  32. Song, K., X. Fu, D.M. Kim, G. Kim, J.S. Nam, T.G. Kim, H.Y. Kim, S.W. Lee, B.K. Min, and M.B.G. Jun, "The Geometrical Predictions of the 3D Milling Process for Carbon Fiber Reinforced Polymer (CFRP) Machining," World Congress on Micro and Nano Manufacturing, Sep. 18-20, Portoroz, Slovenia, 2018.
  33. Joe, H.E., K. Nazeri, Y. Cho, F. Ahmed, J.K. Park, and M.B.G. Jun, "Microfabrication Techniques Using a Femtosecond Laser for Fabrication of High Precision Optical Components," World Congress on Micro and Nano Manufacturing, Sep. 18-20, Portoroz, Slovenia, 2018.
  34. Yun, H., H. Kim, and M.B.G. Jun, "Machine Health Monitoring and Visualization for Smart Manufacturing," US-Korea Conference on Science, Technology, and Entrepreneurship, Aug. 1-4, Queens, NY, USA, 2018.
  35. Cho, Y., F. Ahmed, P.C. Lee, H.E. Joe, H. Yun, and M.B.G. Jun, "Characterization of Long-Period Fiber Grating with a Screw Shape Fabricated by a Single-Path Scanning of Femtosecond Laser," to Manufacturing Science and Engineering Conference, Jun 13-22, College Station, TX, USA, 2018.
  36. Rukosuyev, M., S. Baqar, C. Bradley, P.C. Lee, and M.B.G. Jun, "Flame Assisted Spray Pyrolysis and Simultaneous Deposition Using Annular Flame Nozzle," International Mechanical Engineering Congress and Exposition (IMECE), Nov. 3-9, Tampa, FL, USA, 2017.
  37. Farhadmanesh, M., A.S. Salehi, K. Ahmadi, and M.B.G. Jun, "Virtual Milling of Fiber Reinforced Polymers," 6th International Conference on Virtual Machining Process Technology (VMPT), May 29-June 2, Montreal, QC, Canada, 2017.
  38. Farhadmanesh, M., A.S. Salehi, K. Ahmadi, and M.B.G. Jun, "Delamination Prediction in Milling Carbon Fiber Reinforced Polymer Composites," ASME Manufacturing Science and Engineering Conference (MSEC), June 4-8, Los Angeles, CA, USA, 2017.
  39. Rukosuyev, M., P.C. Lee, and M.B.G. Jun, "Uniform Spray-based Large Area Nanoparticle Coating at Nanometric Thickness," TechConnect World Innovation Conference and Expo, May 14-17, Washington, DC, USA, 2017.
  40. Nazeri, K., V. Ahsani, F. Ahmed, P.C. Lee, and M.B.G. Jun, "Photonic Crystal Fiber Based Refractive Index Sensors," TechConnect World Innovation Conference and Expo, May 14-17, Washington, DC, USA, 2017.
  41. Yao, S.X., J. Lee, J.K. Lee, M.B.G. Jun, and P.C. Lee, "A New Gas/Supercritical Fluid (SCF) Diffusivity and Solubility Measurement Method for CO2 Saturated Polymer Systems Using Optical Transmission Property," TechConnect World Innovation Conference and Expo, May 14-17, Washington, DC, USA, 2017.
  42. Ahsani, V., F. Ahmed, J. Ko, Y. Cho, C. Bradley, and M.B.G. Jun, "Miniature Dual Flame-based Tapering Process and System Development for Fabrication of Optical Fiber Sensors," World Congress on Micro and Nano Manufacturing, March 27-30, Kaohsiung, Taiwan, 2017.
  43. Rukosuyev, M., S. Baqar, C. Bradley, and M.B.G. Jun, "Controlling PCL Electrospun Fibers using Melt Electrospinning Technique based on Filaments," World Congress on Micro and Nano Manufacturing, March 27-30, Kaohsiung, Taiwan, 2017.
  44. Ko, J., P.C. Lee, and M.B.G. Jun, "Controlling PCL electrospun fibers using melt electrospinning technique based on filaments," ASME International Mechanical Engineering Congress and Exposition (IMECE), November 11-17, Pheonix, Arizona, USA, 2016.
  45. Rukosuyev, M., S. Baqar, and M.B.G. Jun, "Nanoparticle Coating System Development for Surface Functionalization," 5th International Conference of Manufacturing Technology Engineers (ICMTE), Oct. 5-7, Seoul, Korea, 2016.
  46. Luo, S., Z. Dong, and M.B.G. Jun, "Optimal Tool Orientation Generation and Chip Volume/Cutting Force Predictions for 5-axis CNC Machining of Curved Surfaces Using Flat-end Mills," CAD Conference and Exhibition, June 27-29, Vancouver, BC, Canada, 2016.
  47. Luo, S., M.B.G. Jun, and Z. Dong, "Numerical Simulation of Chip Ploughing Volume and Forces in 5-axis CNC Micro-milling Using Flat-end Mills," 44th SME North American Manufacturing Research Conference, June 27-July 1, Blacksburg, Virginia, USA, 2016.
  48. Ko, J., V. Ahsani, S.X. Yao, M.B.G. Jun, and P.C. Lee, "A Novel Fiber Processing Technology Based on Fused Deposition 3D Printing Combined with Melt Electrospinning," 32nd International Conference of the Polymer Processing Society, July 25-29, Lyon, France, 2016.
  49. Rukosuyev, M. and M.B.G. Jun, "Flame Assisted Dual Velocity Nanoparticle Coating System," 11th International Conference on MicroManufacturing (ICOMM), March 29-April 2, LA, USA, 2016.
  50. Ahmed, F., Y. Cho, K. Nazeri, V. Ahsani, P.C. Lee, and M.B.G. Jun, "Refractive Index Sensing by Femtosecond Laser Fabricated Fiber Optic Sensors," 11th International Conference on MicroManufacturing (ICOMM), March 29-April 2, LA, USA, 2016.
  51. Ahmed, F., V. Ahsani, Y. Cho, A. Saad, and M.B.G. Jun, "Refractive Index Modification using Femtosecond Laser for Fiber Optic Sensor Development," the Optical Society of Korea Winter Annual Meeting, January 20-22, Daejeon, Korea, 2016.
  52. Burton, G., L. Melo, F. Ahmed, M.B.G. Jun, and P. Wild, "Optical Fiber Based CO2 Storage Site Monitoring Sensor Development," 6th Korea CCS International Conference, January 27-29, Jeju, Korea, 2016.
  53. Bayesteh, A. and M.B.G. Jun, "2D Simulation of 3-axis Milling for Carbon Fiber Reinforced Polymer (CFRP) Composites," Korean Society of Precision Engineers (KSPE) 2015 Autumn Conference, December 16-18, Jeongseon, Korea, 2015.
  54. Ahmed, A. and M.B.G. Jun, "Tapered Photonic Crystal Fiber Based Mach-Zehnder Interferometer for Enhanced Refractive Index Sensing," IEEE Sensors, November 1-4, Busan, Korea, 2015.
  55. Joe, H.E., F. Ahmed, M.B.G. Jun, and B.-K. Min, "Bowtie-shaped Hole Array for Fiber-optic Refractive Index Sensing in Telecome-wavelengths," 11th Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR), August 24-28, Busan, Korea, 2015.
  56. Lee, J.K., J. Ko, P.C. Lee, M.B.G. Jun, and Simon S. Park, "Melt electrospun coaxial microfiber processing and properties," 31st International Conference of the Polymer Processing Society, June 7-11, Jeju Island, Korea, 2015.
  57. Luo, S., Z. Dong, and M.B.G. Jun, "Chip Volume Calculation and Simulation for Machining Curved Surfaces in Five-axis CNC Machining with Flat-end Mill," 4th International Conference on Virtual Machining Process Technology, June 2-5, Vancouver, BC, Canada, 2015.
  58. Ko, J., J.K. Lee, P.C. Lee, and M.B.G. Jun, "Manufacturing and Characterization of Coaxial Microfibers with Different Molecular Weights using Melt Electrospinning Technique," 4M/ICOMM, Mar. 31-Apr. 2, Milan, Italy, 2015.
  59. Ahmed, F. and M.B.G. Jun, "Bragg Grating Fabrication in Microfiber by Femtosecond Pulse Filamentation Induced Periodic Refractive Index Modification," SPIE Photonic West, Feb. 7-12, San Francisco, 2015.
  60. Ahmed, F., M.B.G. Jun, H.-E. Joe, N.-C. Park, and B.-K. Min, "Mach-Zehnder Interferometer using Small Diameter Single Mode Fiber for Refractive Index Sensing," Asia Communications and Photonics Conference, November 11-14, Shanghai, China, 2014.
  61. Zhang, Y. and M.B.G. Jun, "Atomized Water and Oil Sprays as a Single Jet for Cutting Fluid Delivery in Micro-Milling," International Workshop on Microfactories, October 5-8, Honolulu, HI, 2014.
  62. Rukosuyev, M., A. Esmaelirad, and M.B.G. Jun, "Heated Spray Nanoparticle Deposition System Development," International Conference of Manufacturing Technology Engineers, September 30 - October 2, Jeju, Korea, 2014.
  63. Ko, J. and M.B.G. Jun, "3D Mathematical Modeling and Fabrication of Tubular Scaffolds for Vascular Tissue Engineering using Melt Electrospinning," International Conference on Biofabrication, September 28 - October 1, Pohang, Korea, 2014.
  64. Ko, J. and M.B.G. Jun, "3D Modeling of Melt Electrospinning Process," 3rd International Conference on Electrospinning, August 4-7, San Francisco, CA, 2014.
  65. Rukosuyev, M. and M.B.G. Jun, "Fabrication of a Micro-scale Component using Both Micro-Milling and Femtosecond Laser Machining," International Symposium on Green Manufacturing and Applications (ISMGA 2014), June 24-27, Busan, Korea, 2014.
  66. Mohtaram, N.K., J. Ko, C. King, A. Montgomery, L. Sun, R. Vasandani, M.B.G. Jun, and S. Willerth, "Melt Electrospun Microfiber Scaffolds with Novel Architecture for Neuronal Differentiation of Human Induced Pluripotent Stem Cells," 31st Annual Meeting of the Canadian Biomaterials Society, June 4-7, Halifax, Nova Scotia, 2014.
  67. Ahmed, F., M.B.G. Jun, and P. Wild, "Fiber Optic Interferometer with Enhanced Refractive Index Sensitivity," CMC Annual Conference, May 27-29, Calgary, Canada, 2014.
  68. Luo, S., Z. Dong, and M.B.G. Jun, "Optimization of 5-axis CNC Toolpath and Cutter Orientation for Machining Curved Surfaces," 3rd International Conference on Virtual Machining Process Technology, May 20-23, Calgary, AB, Canada, 2014.
  69. Ko, J., S. Bhullar, Y. Cho, and M.B.G. Jun, "Fabrication and Characterization of Novel Stretchable Force Sensor using Melt Electrospinning," 9th International Conference on MicroManufacturing, March 25-28, Singapore, 2014.
  70. Valinasab, B., M. Rukosuyev, J. Lee, and M.B.G. Jun, "Atomization-based Spray Coating for Improved 3D Scanning," 9th International Conference on MicroManufacturing, March 25-28, Singapore, 2014.
  71. Burton, G., L. Melo, B. Davies, F. Ahmed, M.B.G. Jun, and P. Wild, "Monitoring CO2 Injection and Leakage using Fiber Optic Sensors," The 4th Korea CCS International Conference, February 24-26, Jeju, Korea, 2014.
  72. Bayesteh, A., F. Ahmed, and M.B.G. Jun, "Computer Aided Manufacturing (CAM) Software Development for Laser Machining," ASME International Mechanical Engineering Congress and Exposition, Nov. 15-21, San Diego, CA, USA, 2013.
  73. Bayesteh, A. and M.B.G. Jun, "Feed Rate Optimization Issues in Micro-Milling," NAMRC, Jun. 10-14, Madison, Wisconsin, USA, 2013.
  74. Mohtaram, N., J. Ko, M. Carlson, M.B.G. Jun, and S. Willerth, "Nanofabrication of Electrospun Fibers for Controlled Release of Retinoic Acid," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  75. Ko, J., N. Mohtaram, P.C.D. Lee, S. Willerth, and M.B.G. Jun, "Parametric Studies of Melt Electrospinning Poly e (caprolactone) Fibers for Tissue Engineering Applications," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  76. Bayesteh, A., D. Gym, and M.B.G. Jun, "2-Dimensional Ploughing Volume Simulation Model Development in Micro Flat End Milling," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  77. Rukosuyev, M., J. Lee, and M.B.G. Jun, "Hydrophobic Hierarchical Structure Manufacturing by Femtosecond Laser Ablation," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  78. Ahmed, F., S. Jun, P. Wild, and M.B.G. Jun, "Fabrication of Long Period Gratings in Pure Silica Fiber and Their Application in Refractive Index Sensing," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  79. Bhullar, S., F. Ahmed, J. Ko, and M.B.G. Jun, "Design and Fabrication of Stent with Negative Poisson's Ratio," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  80. Elfurjani, S., B. Valinasab, and M.B.G. Jun, "Evaluation of Rotating Probes for Acoustic Emission Contact Sensing," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  81. Zhang, Y. and M.B.G. Jun, "Feasibility of Lignin as Additive in Metalworking Fluids," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  82. Luo, S., A. Bayesteh, M.B.G. Jun, and Z. Dong, "Calculation and Simulation of Chip Ploughing Volumes in Micro Ball-End Mill Machining," ICOMM, Mar. 25-28, Victoria, BC, Canada, 2013.
  83. Ahmed, F., S. Ahsan, M.S. Lee, M.B.G. Jun, "Femtosecond Laser Based in-Fiber Long Period Grating Fabrication for Improved Solution Sensing," SPIE Photonic West, Feb. 2-7, San Francisco, 2013.
  84. Ahsan, S. F. Dewanda, F. Ahmed, and, M.B.G. Jun, "Characterization of Femtosecond Laser Filament-Fringes in Titanium," SPIE Photonic West, Feb. 2-7, San Francisco, 2013.
  85. Melo, L.B., F. Ahmed, M.B.G. Jun, and P. Wild, "Long Period Grating Inscribed by Femtosecond Laser For Refractive Index Measurements in Aqueous Environments," 22nd International Conference on Optical Fiber Sensors, Oct. 15-19, Beijing, China, 2012.
  86. Bayesteh, A. and M.B.G. Jun, "Feed Rate Optimization for Micro-Milling Using Measured Cutting Forces," International Conference on Virtual Machining Process Technology, May 28 - Jun. 1, Montreal, Canada, 2012.
  87. Elfurjani, S. and M.B.G. Jun, "Evaluation of a Probing System Using Acoustic Emission Sensors and a Rotating Probe For Measurement of Miniature Components," International Conference on Virtual Machining Process Technology, May 28 - Jun. 1, Montreal, Canada, 2012.
  88. Burton, G., C.S. Goo, M.B.G. Jun, "Feasibility of Vegetable Oil in Water Emulsion Achieved through Ultrasonic Atomization as Cutting Fluids," NAMRC 40, Jun. 4-8, Notre Dame, Indiana, USA, 2012.
  89. Ahmed, F., D. Bouchard, P. Wild, and M.B.G. Jun, "Femtosecond Pulse Filamentation Based Fabrication of In-Fiber Bragg Grating in Single Mode Fiber and Its Performance Analysis," ICOMM, Mar. 12-14, Chicago, USA, 2012.
  90. Elfurjani, S., A. Bayesteh, and M.B.G. Jun, "Experimental Study of Microscale Probe Measurement System Using Wire-Based Probe and Acoustic Emission Sensor," ICOMM, Mar. 12-14, Chicago, USA, 2012.
  91. Ko, J., N.K. Mohtaram, S.M. Willerth, and M.B.G. Jun, "Electrospinning of Nonaligned and Aligned Polycaprolactone Fibers for Bone Tissue Engineering," ICOMM, Mar. 12-14, Chicago, USA, 2012.
  92. Goo, C.S., M.B.G. Jun, and A. Saito, "Probing System for Measurement of Micro-Scale Components," NAMRC 39, Jun. 13-17, Corvallis, Oregon, USA, 2012.
  93. Goo, C., M. Menard, L.H. Huynh, C. Papadopoulos, M.B.G. Jun, and S.S. Park, "Experimental Investigation of the Machinability of Polystyrene Reinforced with Single Walled Carbon Nanotubes," NAMRC 39, Jun. 13-17, Corvallis, Oregon, USA, 2011.
  94. Goo, C.S. and M.B.G. Jun, "An Acoustic Emission-Based Surface Detection for Micromachining," CANCAM, Jun. 5-9, Vancouver, BC, Canada, 2011.
  95. Goo, C.S. and M.B.G. Jun, "Evaluation of Atomized Based-Vegetable Oil-Based Cutting Fluid," CANCAM, Jun. 5-9, Vancouver, BC, Canada, 2011.
  96. Rukosuyev M., L. Dutton, J. Ko, and M.B.G. Jun, "Design and Fabrication of a Three Dimensional Commemorative artistic Plaque," CANCAM, Jun. 5-9, Vancouver, BC, Canada, 2011.
  97. Park, S., M. Malekian, M. Mahmoodi, J. Muller, and M.B.G. Jun, "Influence of CNT Alignment in Micro Milling of Injection Molded CNT Composites," ICOMM, Mar. 7-10, Tokyo, Japan, 2011.
  98. Jun, M.B.G., C.S. Goo, M. Malekian, and S.S Park, "A New Mechanistic Approach for Micro End Milling Force Modeling," IMECE-ASME, Nov. 12-18, Vancouver, BC, Canada, 2010.
  99. Saito, A. and M.B.G. Jun, "On-Machine Measurement by using AE Sensor for Micro-scale Machine Tools," Japan Society of Precision Engineering (JSPE) Autumn Meeting, Sep. 27-29, Nagoya, Japan, 2010.
  100. Goo, C., M. Menard, L.H. Huynh, C. Papadopoulos, S.S. Park, and M.B.G. Jun, "Comparing Micromachining Results of Polystyrene and Polystyrene Based Carbon Nanotube Composite," CSME Forum, June 7-9, Victoria, BC, Canada, 2010.
  101. Ko, J., G. Gilardi, E. Haslam, E., E.J. Park, and M.B.G. Jun,"Fuzzy PID Controller for Artificial Finger Using Shape Memory Alloy (SMA) Actuator," CSME Forum, June 7-9, Victoria, BC, Canada, 2010.
  102. Goo, C., M. Menard, L.H. Huynh, C. Papadopoulos, S.S. Park, and M.B.G. Jun, "Micromachining of Polymer Composites Reinforced with Single-Walled Carbon Nanotubes," International Conference on Micro-Manufacturing, Apr. 5-8, Madison, WI, USA, 2010.
  103. Hyunh, L.H., C. Goo, M. Rukosuyev, M.B.G. Jun, and C. Papadopoulos, "Synthesis of Polymer Composites Using Pristine Single-Walled Carbon Nanotubes," 239th ACS National Meeting, March 21-15, San Francisco, CA, USA, 2010.
  104. Sajjadi, M., M. Malekian, S.S. Park, and M.B.G. Jun, "Investigation of Micro Scratching and Machining of Glass," International Conference on Manufacturing Science and Engineering, Oct. 4-7, West Lafayette, IN, USA, 2009.
  105. Rukosuyev, M., C.S. Goo, and M.B.G. Jun, "Preliminary Design and Development of Cutting Fluid Application System for Micro-Machining Based on Ultrasonic Atomization," 5th International Workshop on Microfactory Technology, August 20-21, Jeju, Korea, 2009.
  106. Araujo, A. and M.B.G. Jun, "The Specific Cutting Energy of the Cutting Edges of the Combined Drilling/Thread Milling Process: Thrilling," 12th CIRP Conference on Modelling of Machining Operations, May 7-8, Donostia-San Sebasti?n, Spain, 2009.
  107. Jun, M.B.G. and A.C. Araujo, "Modeling and Analysis of the Thread Milling Operation in the Combined Drilling/Thread Milling Process," International Conference on Manufacturing Science and Engineering, Oct. 7-10, 2008, Chicago, IL, USA, 2008.
  108. Jun, M.B.G., "Investigation of Acoustic Emission Generation and Vibrations in Micro-Endmilling," CSME-SCGM 2008, June 5-8, Ottawa, ON, Canada, 2008.
  109. Bourne, K.A., M.B.G. Jun, S.G. Kapoor, and R.E. DeVor, "A Hybrid Process for Scribing Features with Micro-Scale Cross-sections and Meso-Scale Lengths," Workshop on Reconfigurable Systems, Microsystems, & Nanotechnology, May 8-9, 2007, Huntsville, AL, USA, 2007.
  110. Jun, M.B.G., K. Bourne, S.G. Kapoor, and R.E. DeVor, "Study of the Effects of Edge Radius, Minimum Chip Thickness, and Elastic Recovery on Specific Cutting Energies in Micro-Machining," Proceedings of the 2nd International Conference on Micro-Manufacturing, Sep. 10-13 2007, Greenville, SC, USA.
  111. Bourne, K., M.B.G. Jun, S.G. Kapoor, and R.E. DeVor, "Effect of Tool-Tip Vibration and Stability on Acoustic Emission Generation in Micro-Endmilling", Proceedings of the 15th International Symposium on Electromachining (ISEM XV), Apr. 23-27, 2007, Pittsburgh, PA, 2007.
  112. Bourne, K., M.B.G. Jun, S.G. Kapoor, and R.E. DeVor, "An Acoustic Emission-Based Method for Determining Relative Orientation Between a Tool and Workpiece at the Micro-Scale", Proceedings of the ASME International Manufacturing Science & Engineering Conference, Oct. 8-11, 2006, Ann Arbor, MI, Paper No. MSEC2006-21120, 2006.
  113. Jun, M.B.G, Joshi, S., DeVor, R.E., and Kapoor, S.G., "Evaluation of An Atomization-Based Cutting Fluid Application System for Micro-Machining", Proceedings of the 1st International Conference on Micro-Manufacturing, Sep. 13-15, 2006, Urbana-Champaign, IL, pp. 109-114, 2006.
  114. Liu, X., M.B.G. Jun, R.E. DeVor, and S.G. Kapoor, "Prediction and Analysis of Surface Location Error in Micro-Endmilling", Proceedings of 2nd International Workshop on the Next-Generation Microfactory System, July 6-7, 2006, Jeju, Korea, 2006.
  115. Jun, M.B.G., K. Bourne, R.E. DeVor, and S.G. Kapoor, "Estimation of Effective Error Parameters in High-Speed Micro-Endmilling", Proceedings of the CIRP 2nd International Conference on High Performance Machining, June 12-13, 2006, Vancouver, BC, Canada, 2006.
  116. Liu, X., M.B.G. Jun, R.E. DeVor, and S.G. Kapoor, "Cutting Mechanisms and Their Influence on Dynamic Forces, Vibrations and Stability in Micro-endmilling", Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2004, Nov 13-19 2004, Anaheim, CA, United States, pp. 583-592, 2004.

Jun Laboratory

Laboratory for Advanced Multiscale Manufacturing

School of Mechanical Engineering , Room 3061D

Purdue University

585 Purdue Mall, West Lafayette, IN, 47907-2088, USA