| First
steps are removing everything you can from the car basically...I
unbolted the air tubes and egr and completely removed the egr for the
time being and put it to the side...dont loose the o ring thats on the
egr. Next was to undue and remove all of the plug wires...i
removed all but the the pass. side rear one cuz my hands are just too
fat to fitm but the manifold still came out with that there...dont
forget to remove the oil dipstick & tube...i used a pair of locking
vice grips and a door panel removal tool to shimmy the bottom of it out
of the hole and then just pulled it out from the top...also i left the
plugs in for manifold removal as they really didnt get in the way...all
six bolts from the manifolds to the cats snapped off dont be worried
though its actually easier to take them off this way as the entire
exhaust will just hang free very quickly. |
